Services

Pavement Restoration

Pavement restoration can be done in various ways for different reasons. The most common reasons include: restoration after underground utilities have been installed, replaced or repaired; aging asphalt has developed cracks, pot holes or other damage; tree roots have damaged paved surfaces or concrete walks; and improper drainage and/or poor base material have caused the paved surface to be undermined causing pot holes or sunken surfaces. The type of restoration typically depends on the cause.

• Asphalt Patching
  Asphalt patching greatly extends the life of existing paved surfaces by repairing the damaged areas, such as, cracks, pot holes and aged areas. The damaged area is cut out and completely removed. The pavement base material is inspected and corrected as needed. The area is then patched and smoothed with new asphalt, restoring the damaged area to like new condition.
• Asphalt Overlays
  Asphalt overlays restore aging asphalt surfaces with a new wearing surface. After patching has been completed, the existing surface is thoroughly cleaned and a tacking coat of glue is placed on the clean surface. The entire area is then repaved with an overlay of 1½” to 2” of new asphalt. This new surface will last for several years.
• Asphalt Grinding
   Asphalt grinding is used to remove damaged asphalt or to prepare an existing surface for an overlay. Asphalt grindings make an excellent base material and can also be recycled into new asphalt. The use of grinding equipment can be beneficial at saving both time and money.
• Seal Coating
  Seal coating is primarily used on driveways and parking areas to protect asphalt from the damaging effects of petroleum products. It is also used to fill surface cracks and prevent water from entering and damaging the base material. Seal coating protects and extends the life of asphalt, and is visually appealing as well.

CONCRETE SERVICES

Concrete Restoration

Concrete restoration is often performed for many of the same reasons as asphalt restoration. In many cases, asphalt patching is needed along with concrete, due to the placing of forms for curbs or other areas where concrete and asphalt have common joints. Concrete is removed and restored to sidewalks, streets, curbs, driveways, etc. with various finishes.

• Concrete Finishing
   There are several ways to finish concrete. The most common are:
  • Light Broom Finish.  Typically done on city sidewalks, residential sidewalks, and driveways.
  • Heavy Broom Finish.  Typically done on city and county streets or very steep driveways.
  • Washed Aggregate Finish. The surface layer of concrete is washed off to expose the rock or aggregate. This is also used to create a custom design in the finish.

SPECIALTY SERVICES

In addition to asphalt and concrete restoration, AA Asphalting, Inc. provides additional services. These services may be performed by one of our qualified subcontractors. Our subcontractors are supervised to ensure quality and services are done to our and our customer’s satisfaction.

• ADA Upgrades
  ADA (American’s with Disabilities Act) upgrades are done by installing and retrofitting ramps and accesses to comply with the ADA. We will complete and upgrade signage and pavement markings.
• Pavement Marking
  Pavement marking and extruded curbing is provided through one of our qualified subcontractors.
• Site Preparation
  Site preparation can be done for all of your new construction needs, including clearing, dozing, setting sub grade, staking, and fine grading for paving or landscaping, etc. In addition, we also fine grade gravel driveways and road shoulders.
• Demolition
  Demolition can be done to break up and remove concrete walls, concrete slabs and old paved areas. After demolition, we will completely remove and properly dispose of all the debris.
• Storm Drainage
  Improper drainage is a leading cause of asphalt damage. We repair and install storm water drainage systems for commercial and residential projects.